Fabric Masks For Disposable Respiratory Protection
To Use Only Against Solid Particles And Liquid
Protection Level Indicator: FFP22
IMPORTANT : before wearing the mask it is essential to wash your hands with soap and water or with an alcoholic solution.
1. The mask is equipped with two elastic laces; place a lace around an ear and the second lace around the other ear. Place the mask above the mouth and nose, then place under the chin with the nose facing upwards;
2. Place the fingertips of both hands at the top of the nose. Model the nose on the shape of the nose by pushing the inside while moving the fingertips down on both sides of the nose. If you press the mask nose with a hand,the performance of the mask could be less effective.
3. Before entering the contaminated area, check the mask seal to the face.
-Place both hands completely on the mask and inhale abruptly. You should feel a negative pressure inside the mask. If the air comes out around the nose, re-set the nose again as described in paragraphs 1 and 2.
- If there are no losses, you can access the contaminated area.
WARNING:
- Model the nose with a finger inside, NOT turn it into a sharp angle in the shape of V!
- DO NOT touch the mask during use, in such case wash your hands with soap and water or with an alcoholic solution.
- When the masks are not used, store in a pristine area at constant temperature.
- When the mask becomes wet, replace it with a new one and do not reuse it. This product is designed to be used only once. Once removed from the face must be thrown into a closed bag
- After use it is essential to wash your hands with soap and water or with an alcoholic solution