VORTICE VORT HRW 20 MONO Heat recuperator

Enclosure in expanded polypropylene material (PPE).

• Internal panel in self-extinguishing V0 aesthetic plastic polymer (ABS), lined internally with heat-insulating material.

• Low voltage EC fan motor with shaft mounted on ball bearings.

• 5 speeds with different flow rates: 10 m3/h; 16 m3/h; 22 m3/h; 30 m3/h and 40 m3/h.

• High efficiency storage type heat exchanger made of ceramic material.

• External grille molded in rubber, which can be mounted from the inside through the hole in the wall.

• Separate anti-insect net, which can be inserted into the duct together with the external grille at the time of installation.

• Internal air intake made on the perimeter of the front panel.

• Circular section air delivery mouth with a nominal diameter of 160 mm.

• Target wall depth: 300 mm. Using the specific optional kit, it is possible to install them on walls with a depth of up to 700 mm.

• Washable G3 filter, easily accessible for maintenance.

• On/off and operating mode selection controls integrated in the body of the product;

• Arrangement for wall wiring;

• Electronic board with on-board power supply, integrated in the product;

• Filter status and diagnostic LED;

• 3 operating modes:

o Ventilation with heat recovery;

o Ventilation with air extraction only;

o Ventilation with air inlet only.

• Possibility of automatic operation by installing optional temperature and relative humidity sensors.

DATA SHEET